Fencing Contractors in Tenterden

Start with the boundary and the privacy you need.

Show the full fence line, corners and gate openings. Decide whether the priority is screening a patio, enclosing the garden, containing pets or replacing a failing boundary. Check the proposed height and sightlines from the house and seating area.

For your Tenterden property, measure the rear boundary, side passage and frontage separately. Photograph each run from end to end, including corners, slopes, planting and any old posts set into paving. Mark the sections to retain and show where a gate needs to open. If the aim is privacy around a patio, include the view from the seating area and the house. Tell us about narrow access or a route across finished landscaping so removal and material handling can be included in the scope.

Confirm the boundary line and permission for the work before setting out. A replacement should follow an agreed line; the position of an old fence alone should not be used to resolve uncertain ownership.

Compare fence construction, not just the style name.

Closeboard commonly uses overlapping feather edge boards. It may be built along the boundary using boards and rails or supplied as ready-made panels. Closeboard and feather edge therefore overlap as descriptions; compare the actual construction and supports.

Panel fencing uses complete sections between posts. Existing spacing and supports must suit the proposed replacements. Include the panel dimensions, fixing method and condition of the posts when requesting a like-for-like change.

Slatted fencing offers a different balance of privacy and openness. Spacing and viewing angle affect screening, so consider neighbouring sightlines before choosing from a photograph. Discuss the complete support and fixing arrangement for the site’s exposure.

Choose posts and gravel boards with the fence.

Timber and concrete posts differ in appearance and compatibility with the fencing above and between them. If existing posts are to stay, they need to be stable, sound and suitable for the new sections.

Gravel boards can keep main timber panels or boards away from soil where the construction allows. Include their height with the panel and any trellis when agreeing the total fence height.

A sloping boundary may need stepped sections or construction that follows the ground. Discuss the finish from both sides and any gaps at the base, particularly for pets. Ground conditions and the specified fence determine the support detail; one post-hole recipe does not suit every boundary.

Garden gates and access through the boundary.

Include gate openings in the initial measurements. Agree the clear opening, swing direction, hinges, latch and any access needs for bins or garden equipment.

A gate needs suitable supports and enough clearance to open across the adjoining ground. Photograph existing paths and changes in level so the gate and paving can be considered together. Matching boards or slats can connect the gate visually with the fence without overlooking its hardware and support requirements.

Can the damaged section be repaired?

Read our Tenterden fence repairs guide

Broken boards or a damaged panel may be replaced while sound sections remain. A leaning, loose or decayed support needs assessment as well as the visible fence. Replacing boards alone will not correct an unstable post.

Send a view along the whole run and close-ups of posts, rails and fixings. Where several supports or sections have failed, replacing a larger part of the boundary may be more appropriate. Keep clear of unstable fencing while an assessment is arranged.

How much does fencing cost in Tenterden?

The installed price depends on length, finished height, construction and working conditions. A timber supply price, panel price or hourly rate does not include every part of a fitted boundary.

For a 30-metre Tenterden fence, sketch each straight run and mark corners, gate openings and changes of level. Record the finished height you want as well as the length. The number of bays and posts depends on the selected construction and spacing; a 30-metre garden perimeter with several corners is a different fitting job from one uninterrupted line. Show old post bases and the disposal route in your photographs.

Compare written quotes covering:

• The measured run, total height and agreed fence construction.
• Removal of old fencing, post extraction and waste disposal.
• Posts, supports, panels or boards, rails and fixings.
• Gravel boards, corners, gates and finishing details.
• Access, additional ground work, labour and VAT treatment.
• Exclusions, provisional items and the proposed programme.

Ask whether a labour-only or daily rate includes removal, old concrete extraction, waste handling and gate fitting. A supplier’s panel price covers a component rather than the complete boundary. Send access photos as well as measurements, and compare the supplied-and-fitted total with the same materials, disposal and VAT treatment included.

Compare a price per metre with the complete fitted cost.

A per-metre figure is useful only when the height, construction and included work are the same. Confirm whether the rate includes posts, gravel boards, rails, fixings, old-fence removal and disposal. Gates, corners, awkward access and removing old concrete may be separate items.

For a 30-metre boundary, multiply an agreed per-metre rate by 30 only after those inclusions are clear, then add any separately quoted items and applicable VAT. Ask for a supplied-and-fitted total as well. If two quotes use different panel heights or retain different supports, request matching scopes before judging the price.

What is the 2 metre fence rule?

Planning Portal gives usual limits in England of 1 metre beside a vehicle highway, including its footpath, and 2 metres elsewhere, measured from ground level. Existing taller fences have separate provisions where height is not increased.

Listed buildings, restricted rights and conservation-area removals need additional checks.

Include gravel boards and trellis in the total height. Read the Planning Portal fencing guidance and confirm property-specific requirements with Ashford Borough Council before work begins.

Does a neighbour have to pay half the fence cost?

Do not assume that a shared boundary means a 50:50 bill. Establish ownership and any maintenance responsibility from the title register, deeds or an existing agreement before arranging the work. The side with the posts and rails, or whether the fence is on the left or right of the garden, is not a reliable ownership test.

Discuss the specification and any proposed contribution before commissioning a replacement. Record what has been agreed, including access and the sections being changed. Where responsibility is disputed, resolve it or obtain appropriate advice before authorising changes. HM Land Registry’s boundary guidance explains what property records can and cannot show, and GOV.UK covers boundary agreements between neighbours.

Installation, access and timber care.

1. Agree the line and specification. Confirm boundary position, height, style, posts and gate details.
2. Plan preparation. Identify retained features, old fence removal, disposal and working access.
3. Fit the agreed construction. Install the supports and sections with suitable alignment and fixing details.
4. Check and hand over. Review the finish and gate operation, and explain the supplied materials’ care requirements.

Ask how ground and weather conditions could affect the programme and how access will be maintained during fitting. Follow the guidance for the actual timber and treatment; keep accumulated soil and debris away from vulnerable sections and check supports and fixings periodically.

Questions about fencing in Tenterden

Plan the fencing with the wider garden.

Explore our Tenterden landscaping services and Tenterden patio installation if the project includes new paths or seating areas. Share the whole brief so boundaries, paving and access can be planned together.

See our fencing services across Kent for the wider service. Send details of any commercial or security boundary requirement so we can confirm whether the proposed work is suitable.