Fencing Contractors in Ramsgate

Plan each Ramsgate boundary run separately

Show the rear, side and front sections individually, including corners and gate openings. Mark where you need privacy, where an open boundary is preferable and which sections can remain. For screening beside a patio, photograph the view from the seating position as well as along the fence.

Send your Ramsgate postcode and the route for removing the old fence and bringing in materials. Include narrow passages, steps, dense planting and posts set into paving. An exposed section and a sheltered courtyard boundary may need different construction; explain where wind damage or movement has occurred.

Agree the line and authority for the work before setting out. An old fence is a physical feature, not conclusive evidence of the legal boundary. Include changes in ground level and any pet-containment needs when choosing height and base gaps.

Compare fence construction, not just the style name.

Closeboard commonly uses overlapping feather edge boards. It may be built along the boundary using boards and rails or supplied as ready-made panels. Closeboard and feather edge therefore overlap as descriptions; compare the actual construction and supports.

Panel fencing uses complete sections between posts. Existing spacing and supports must suit the proposed replacements. Include the panel dimensions, fixing method and condition of the posts when requesting a like-for-like change.

Slatted fencing offers a different balance of privacy and openness. Spacing and viewing angle affect screening, so consider neighbouring sightlines before choosing from a photograph. Discuss the complete support and fixing arrangement for the site’s exposure.

Picket fencing or a solid privacy boundary?

Picket fencing has gaps between its upright boards and gives an open boundary finish. It can frame a garden or separate areas while preserving views, but it does not provide the screening of a solid closeboard fence. Assess the gaps and height against any pet-containment needs.

For a Ramsgate garden with several levels, show where fencing meets walls, steps and paths. Agree the total height from the relevant ground level, supports and access requirements before fitting. The West Malling case study below shows both styles in a completed garden elsewhere in Kent.

Choose posts and gravel boards with the fence.

Timber and concrete posts differ in appearance and compatibility with the fencing above and between them. If existing posts are to stay, they need to be stable, sound and suitable for the new sections.

Gravel boards can keep main timber panels or boards away from soil where the construction allows. Include their height with the panel and any trellis when agreeing the total fence height.

A sloping boundary may need stepped sections or construction that follows the ground. Discuss the finish from both sides and any gaps at the base, particularly for pets. Ground conditions and the specified fence determine the support detail; one post-hole recipe does not suit every boundary.

Fencing for exposed boundaries and changes in level

Show existing storm damage, movement at posts and any large open areas beside the fence. Discuss the total height, construction, support and fixings together. Choosing a heavier panel alone does not establish that the complete boundary is suitable for its exposure.

Slatted and open styles provide different screening from solid panels. Compare gaps and sightlines from the positions where you use the garden, and confirm the actual construction for the site. On a slope, agree whether sections will step or follow the ground, how the base gaps will be finished and how the fence meets paths or garden walls.

Garden gates and access through the boundary.

Include gate openings in the initial measurements. Agree the clear opening, swing direction, hinges, latch and any access needs for bins or garden equipment.

A gate needs suitable supports and enough clearance to open across the adjoining ground. Photograph existing paths and changes in level so the gate and paving can be considered together. Matching boards or slats can connect the gate visually with the fence without overlooking its hardware and support requirements.

Can the damaged section be repaired?

Fence repairs in Ramsgate: panels, posts and gates

Broken boards or a damaged panel may be replaced while sound sections remain. A leaning, loose or decayed support needs assessment as well as the visible fence. Replacing boards alone will not correct an unstable post.

Send a view along the whole run and close-ups of posts, rails and fixings. Where several supports or sections have failed, replacing a larger part of the boundary may be more appropriate. Keep clear of unstable fencing while an assessment is arranged.

How much does a 20 metre fence cost in Ramsgate?

Measure the actual run, record the total finished height and identify the style, posts and gravel boards. A straight 20m boundary and several short sections totalling 20m can need different numbers of corners, supports and cuts. Mark whether gate openings are included in your measurement.

Compare supplied-and-fitted quotes covering old fencing removal, concrete extraction, disposal, supports, boards or panels, rails and fixings. Include gates, access restrictions, ground work, labour, VAT treatment and exclusions. A retail panel price covers one component of the finished boundary.

Where runs differ in height or style, price them separately. Keeping sound compatible posts can involve different work from replacing the whole fence. Send photographs and dimensions for a free Ramsgate fencing quote.

What do fencers charge per hour?

An hourly figure needs context: is it for one person or a team, and does it include equipment, travel, removal and disposal? Materials, post extraction and gates may be additional. The same boundary length can require different labour where access or ground conditions change.

For an installation, compare the complete written total for the agreed height, construction and removal work. If a quote uses a per-metre rate, check those inclusions before multiplying by the length. A headline hourly or daily rate does not establish the finished garden fence cost.

What is the 2 metre fence rule?

Planning Portal gives usual limits in England of 1 metre beside a vehicle highway, including its footpath, and 2 metres elsewhere, measured from ground level. Existing taller fences have separate provisions where height is not increased.

Check whether your particular property is in a conservation area, any restrictions on permitted development and whether taking down an existing boundary needs permission. Listed buildings and boundaries with neighbouring listed buildings have additional conditions. A choice of timber style does not resolve those checks.

Include gravel boards and trellis in the total height. Read the Planning Portal fencing guidance and confirm property-specific requirements with Thanet District Council before work begins.

Does a neighbour have to pay half the fence cost?

Do not assume that a shared boundary means a 50:50 bill. Establish ownership and any maintenance responsibility from the title register, deeds or an existing agreement before arranging the work. The side with the posts and rails, or whether the fence is on the left or right of the garden, is not a reliable ownership test.

Discuss the specification and any proposed contribution before commissioning a replacement. Record what has been agreed, including access and the sections being changed. Where responsibility is disputed, resolve it or obtain appropriate advice before authorising changes. HM Land Registry’s boundary guidance explains what property records can and cannot show, and GOV.UK covers boundary agreements between neighbours.

Installation, access and timber care.

1. Agree the line and specification. Confirm boundary position, height, style, posts and gate details.
2. Plan preparation. Identify retained features, old fence removal, disposal and working access.
3. Fit the agreed construction. Install the supports and sections with suitable alignment and fixing details.
4. Check and hand over. Review the finish and gate operation, and explain the supplied materials’ care requirements.

Ask how ground and weather conditions could affect the programme and how access will be maintained during fitting. Follow the guidance for the actual timber and treatment; keep accumulated soil and debris away from vulnerable sections and check supports and fixings periodically.

What is the best time of year to install a fence?

A fence can be planned at different times of year when ground, weather and working access allow suitable installation. There is no single best month for every boundary. Explain whether dense planting blocks the line, the ground stays wet or a damaged section needs assessment promptly.

Agree removal, post work and fitting as part of the programme. Weather or unsuitable ground may change the start date. If access crosses a lawn or patio, discuss protection and the removal route before booking. Coordinate new fencing with other garden work so later excavation does not disturb fresh paving.

Questions about fencing in Ramsgate

Plan the fencing with the wider garden.

Explore our Ramsgate landscaping services and Ramsgate patio installation if the project includes new paths or seating areas. Share the whole brief so boundaries, paving and access can be planned together.

See our fencing services across Kent for the wider service. Send details of any commercial or security boundary requirement so we can confirm whether the proposed work is suitable.