Chislehurst
Brick piers, stone coping and railings
A brick boundary with pale stone coping and pier caps, finished with decorative railing panels.
View Chislehurst projectFOLKESTONE · EAST KENT
Add privacy and define garden edges with fencing chosen for the setting. Landscape Gardener of Kent discusses garden fencing in Folkestone, including panels or closeboard, supporting posts, gravel boards, gates and replacement of existing boundaries.

Think about the places where privacy matters: outside the house, beside a terrace or along a shared route. A solid boundary and a more open design create different feelings of enclosure. Compare style with function rather than choosing height first.
Some gardens are more exposed than others. Posts, fixings and panels need to suit the actual position. A tall solid fence should not be assumed to be the best wind solution without considering its construction.
A fence quotation should identify posts, boards or panels, fixings and any gravel boards. Timber and concrete components involve different appearance and care choices. Clarify what is being retained and what will be replaced.
Uneven land may require stepped sections or another agreed arrangement. Where soil sits higher on one side, discuss suitable retaining work; ordinary fencing should not simply take the place of a retaining wall.
Check the clear opening and swing direction of gates against paths, steps, bins and planting. Describe access needs for equipment and everyday use, including the hardware or latches you prefer.
Gate weight and loading influence its supporting posts. Avoid assuming an existing fence post can carry any new gate. Include removal and reinstatement around foundations in the proposed scope where relevant.
Confirm the boundary line, ownership and any agreement before taking down the old fence. Panel orientation does not prove who owns it. Use the relevant records and discuss access to the other side where needed.
English planning guidance has different height conditions beside vehicle highways and elsewhere. Listed buildings and removed development rights can change what is allowed. The familiar 2m rule is not the complete position for every boundary.
Define height, post type, panels or boards, gates and old-fence removal before comparing cost. Access, ground conditions and waste handling can materially change the total. A generic price per metre may omit parts of the job.
A fencer’s day rate is also different from a full installed price with materials and removal. Ask for a clear total and scope so competing proposals can be assessed fairly.
Send your Folkestone postcode, photographs along the boundary and approximate length and height. Show gates, leaning sections and the access route, and identify planting or structures that need protecting.
Periodic inspection and suitable treatment help care for the selected materials. Keep gates operating freely and attend to loose fixings. If damage is limited, ask about targeted repair before deciding to replace the full run.
Discuss fence repairs in Folkestone, garden walls and brickwork in Folkestone, decking installers in Folkestone. Agree levels, access and the order of work together where the project includes several improvements.
Planning Portal: fences, gates and garden walls explains the height conditions. GOV.UK: property boundaries helps with ownership and agreements.
Length, height, components, gates, ground conditions, access and removal determine the installed quotation.
It is part of English planning guidance. The usual threshold beside a vehicle highway or its footpath is lower, and property restrictions can apply.
Specify the complete fence and removal scope first. Compare quotations for the same height, posts, panels and gates.
Rates vary; a day rate does not include every material or disposal cost. Compare the full scope for your installation.
Only where their condition and suitability for the replacement fence have been assessed.
Describe the opening, intended use, swing direction and fittings so suitable support can be included.
Ordinary fencing should not substitute for retaining construction designed for the soil and levels.
We can discuss targeted work where the surrounding supports remain suitable.
OUR WORK · KENT

COMPLETED PROJECT · HERNE BAY
Porcelain patio, raised bed, artificial grass and slatted fencing. See the garden before and after.
This completed Herne Bay project illustrates the work shown in the photographs. We can discuss the requirements of your own Folkestone property.
View this project →Measure the run in sections, including gates and changes in ground level. Specify the height and components rather than only requesting a panel count. Confirm how the fence meets existing walls, sheds and the next retained section, and whether access is available from both sides.
Compare the proposed style with privacy, appearance and maintenance priorities. Where the boundary is exposed, discuss suitability of the supports and fixings. Identify retained planting and any surface reinstatement around post work. Resolve ownership and working access before removal begins.
Use the same agreed scope when comparing proposals. Confirm the materials and work below the visible finish, together with any retained construction. Ask how exclusions or provisional work will be handled and keep the written specification with the quotation.
Photographs, dimensions and access details help define the work. They can start the discussion, with a visit or further assessment where needed. A quoted total is useful when it is clear what the finished result includes.
Agree the programme after the scope and materials are confirmed. Include delivery arrangements, protection of retained features and any periods when the area cannot be used. At handover, confirm how the completed work should be used and cared for, and retain the relevant product details.
YOUR FOLKESTONE PROJECT
Include your postcode, approximate dimensions and access details for a free, no-obligation quotation.